A sump pump and a sewage ejector pump can sound similar, but they serve distinct purposes. Homeowners typically choose the right unit based on whether they’re removing clean groundwater or dealing with wastewater that may include solids and sewage.

Choosing incorrectly—such as using a sump pump where a sewage-rated ejector is required—can lead to clogs, backups, odors, and premature equipment failure.

What a sump pump is designed to handle

A sump pump is built to move groundwater and other “clean” or lightly contaminated liquids away from a home’s foundation. It’s commonly installed in a sump pit below the basement floor to reduce flooding risk during heavy rain, snowmelt, or high water tables.

Typical applications include damp basements, water seepage, and drain tile systems. Because the liquid is usually free of solid waste, sump pumps are not r ... Read more »

Choosing between trenchless sewer repair and open excavation usually comes down to one question: what will it cost in your exact situation? Pricing can vary widely based on sewer line length, pipe diameter, the type of damage, ground conditions, and how much restoration (driveways, landscaping, pavement) is required.

This cost comparison breaks down the typical cost drivers for both approaches so homeowners and property managers can estimate total project budgets more accurately.

Typical cost ranges: what you might pay

In many markets, trenchless methods (such as pipe lining or pipe bursting) often carry a higher price per foot than open excavation. However, open excavation can become more costly when you add labor, traffic control, disposal, and resurfacing. As a result, the lowest bid is not always the lowest final cost.

Rule of thumb: Trenchless repair ... Read more »

Drain camera reports translate what a technician sees inside your pipes into a structured document. While every provider formats reports differently, most include consistent elements: footage/location data, a condition/defect coding system, and an assessment of what needs repair.

If you’ve ever received a report with unfamiliar terms like “CCTV grade,” “blockage,” or a string of numbers/abbreviations, this guide will help you interpret the codes and connect them to the right repair options.

1) The basics: location, orientation, and footage

Before decoding defect codes, confirm the report’s “where and how.” Look for details such as the start point (e.g., cleanout/manhole), pipe size/material (often inches/mm), distance measurements, and the camera’s direction.

Many reports show footage timestamps or distance-in-feet readings so you can ... Read more »

Sewage ejector pumps are designed to move wastewater from below-grade spaces to a main sewer or septic system. Because they handle solids, variable flow, and sometimes corrosive conditions, they can’t safely “set and forget.” Regular maintenance helps ensure they run when needed and shut off properly.

In practice, maintenance is about preventing the two most common failure points: clogging and electrical/mechanical wear. Over time, hair, grease, wipes (even those labeled “flushable”), and sediment can build up in the pump, check valve, or discharge line—raising the chance of reduced performance or sewage backups.

What regular maintenance can prevent

Routine checks generally focus on keeping the system clear and confirming that key components function correctly. This includes inspecting and cleaning accessible parts, verifying the operation of the float or level sensors, and c ... Read more »